Click To Call(689) 285-2720Click To Get A Free Estimate
Red clay brick pavers in a basket weave pattern leading to an arched entry framed by palms

Richer brick color with a sealer chosen for the material

Brick Paver Sealing in Dr. Phillips, FL

Call (689) 285-2720 for a free brick paver sealing estimate from a local contractor.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 285-2720

Can a local contractor seal my brick pavers in Dr. Phillips, and when will they reply?

A local contractor seals brick pavers across Dr. Phillips, FL, and you will have a reply within 1 business day, often sooner. The look-over is free, and you owe nothing if the price does not fit. To start the conversation, call (689) 285-2720.

Brick is the surface people notice from the curb: the warm tone of a front walk or the pattern of a courtyard. It is also porous, so it soaks up whatever lands on it. A fresh, matched coat keeps that tone even and the joints full. A contractor can look at the brick and tell you what it will take. To book that look, book your free estimate.

Call (689) 285-2720

Sealer

Why does brick need a different sealer in Dr. Phillips?

Brick takes in water and lets it back out, so the sealer has to work with that and not against it. A Central Florida sealing company says brick has its own porosity and sealing needs, and Unilock warns that a sealer made for concrete pavers may not suit every stone. To ask what is planned for yours, call (689) 285-2720.

Water-based, because moisture has to escape

The same Central Florida company calls water-based sealer the professional standard here because it lets moisture escape and avoids white haze. It says solvent-based products can turn white and peel in Florida humidity, which often means stripping. Ask which one is on the quote, and book your free estimate to have it written down.

Penetrating products on natural stone

Penetrating sealers soak in and leave no film. A Dr. Phillips company lists them for travertine, and a Central Florida company recommends them for limestone. If part of your property is stone and part is brick, say so when you call (689) 285-2720.

Test a hidden corner

A sealer can darken brick and change its sheen. Seeing the result on a back corner before the whole area is done takes the guesswork out. To ask for a sample, book your free estimate.

Walkway of clay brick pavers bordered by a mulch bed beside a Mediterranean style entry
Pricing

What does brick paver sealing cost in Dr. Phillips?

One Orlando cost page lists clean, sand and seal for brick pavers at $1.50 to $3.00 per square foot, natural stone at $2.00 to $3.50 and stripping and resealing at $3.50 to $5.00. A Dr. Phillips company lists no brick rate of its own, and its driveway and patio rates of $1.50 to $2.50 fit inside that range. To price your brick, book your free estimate.

The same cost page names what moves the price: square footage, the condition of the brick, a previous coat that needs stripping, the type of sealer, and the setting, since screen-enclosed pool decks, slopes and items to move add time. Weeds, mold and efflorescence also push it up, according to a Central Florida company. To compare a bid you hold, call (689) 285-2720.

AreaTypical exampleClean, sand and seal at $1.50 to $3.00Strip old sealer and reseal at $3.50 to $5.00
300 sq ftEntry walk and steps$450 to $900$1,050 to $1,500
500 sq ftCourtyard or small patio$750 to $1,500$1,750 to $2,500
800 sq ftDriveway apron$1,200 to $2,400$2,800 to $4,000
1,200 sq ftDriveway and walkway$1,800 to $3,600$4,200 to $6,000

The middle column uses the brick paver rate from an Orlando cost page, read in November 2026. The last column uses the $3.50 to $5.00 stripping and resealing rate from the same page. A Dr. Phillips company lists a $1,000 minimum, so the smallest row can price higher in practice.

Get a Free Estimate

How it works

What are the steps in the brick sealing process?

Brick jobs follow the same order as other paver work, with extra care at the cleaning and drying stages because the material holds water. Ask a contractor to describe each step, and call (689) 285-2720 if an answer sounds thin.

Look and test

The contractor checks for efflorescence, old sealer, oil and loose bricks, and tests a hidden spot for how the brick takes the coat. To book the look, book your free estimate.

Gentle wash

An algaecide goes on first and a low-pressure wash follows. A Dr. Phillips company uses a high-volume, low-pressure system for this reason, since force empties joints and can wear soft edges. Ask about the equipment by calling (689) 285-2720.

Dry out completely

Unilock says to let the area dry longer than you think necessary, because leftover moisture causes cloudy results. Brick holds water, so this step takes patience, and book your free estimate to talk about the schedule.

Joints and coats

Sand goes into the joints by the wet-sand method, and then two or three thin coats of water-based sealer go on, as one Dr. Phillips company describes it. For the coat count on your quote, call (689) 285-2720.

Myth

Will a new coat fix white haze or a cloudy old sealer on my brick?

Not by itself. Unilock says a whitish film comes from trapped moisture, from over-application, or from sealing over an incompatible earlier coat, and that sealing over efflorescence locks it in. An Orlando company says a failed coat must come off before color is restored. That is why stripping appears as its own line on bids. To ask whether yours needs it, book your free estimate.

One company describes a vacuum system that captures up to 99 percent of the stripped sealer, so it does not end up on walls and landscaping. Whatever the method, ask where the removed sealer goes. Call (689) 285-2720 to talk through a cloudy surface.

Contractor kneeling to press a brick sample against a walkway while a homeowner looks on
Local

How do Dr. Phillips homes and communities shape a brick job?

Dr. Phillips grew from the groves of Dr. Philip Phillips, and the land that held them is now Bay Hill, Orange Tree, Sand Lake Hills and Clubhouse Estates, per Wikipedia. The 2020 census counted 12,328 people. A paver builder in the area names Bay Hill, Vizcaya, Phillips Landing and Sand Lake Hills, and says Vizcaya requires pre-approved paver colors. To plan around your community, call (689) 285-2720.

Gated communities and approvals

The same builder puts association approval at two to three weeks. A change from a natural finish to a wet look can alter how your brick reads from the street, so ask before you book. To start a date, book your free estimate.

Shade, humidity and algae

Dr. Phillips sealing companies tell of intense sun, frequent summer storms and year-round humidity, with algae in shaded areas and sand washed out after storms. Brick under old trees takes the worst of the damp. To have shade spots noted, call (689) 285-2720.

Timing

When is the right time to seal brick in Dr. Phillips?

Pick a dry stretch with dry days after it. Orlando averages 51.45 inches of rain a year, most from June to September, and strong afternoon storms arrive almost daily in the hot season. Unilock says rain during cure can reduce effectiveness. Water-based sealer is walkable in about 3 to 4 hours and cured in 24 to 48 hours, per an Orlando company, and humidity stretches both. To plan a date, book your free estimate.

Orange County also limits lawn watering to one day a week from November 1, 2026 to March 13, 2027, which keeps sprinkler spray off a drying surface on the other six days. Ask for the irrigation to be shut off during the job. Call (689) 285-2720 to set it up.

How often

How long will a coat last on Dr. Phillips brick?

An Orlando cost page says 2 to 4 years, with a maintenance wash every 12 to 15 months. Unilock says many owners reseal every 3 to 5 years. A coat on shaded brick with light foot traffic stretches toward the longer end, and one on a sunny driveway apron shortens it. To put an age on yours, call (689) 285-2720.

Photos

What do sealed brick pavers look like in Dr. Phillips?

Sealed cream paver motor court with a center fountain in front of a tile-roof estate home on a Dr. Phillips brick walk
Sealed paver pool deck inside a screened enclosure on a Dr. Phillips brick walk
Sealed paver lanai with an outdoor kitchen and wicker seating facing a lake at sunset on a Dr. Phillips brick walk
Sealed gray paver walkway with a dark border leading to an arched stone entry and double doors on a Dr. Phillips brick walk
Close view of new concrete pavers after sealing on a Dr. Phillips brick walk
Shaded paver patio with one cleaned half beside a mossy half on a Dr. Phillips brick walk
Contractor pressure cleaning a screened pool deck on a Dr. Phillips brick walk
Contractor sweeping joint sand into a paver pool deck on a Dr. Phillips brick walk
Questions

Questions Dr. Phillips homeowners ask about sealing brick pavers

Is it necessary to seal pavers in Florida?

No, brick pavers hold up bare. Sealing is for the look and the upkeep: color stays richer longer, sand stays put, and algae wipes off more easily. If your brick is dull, patchy or gapped, a coat gives the most back.

What is the average cost to seal pavers in Florida?

One Orlando cost page lists brick pavers at $1.50 to $3.00 per square foot for clean, sand and seal, and stripping and resealing at $3.50 to $5.00. Natural stone such as travertine is priced higher, at $2.00 to $3.50.

How long does sealer last on pavers in Florida?

An Orlando cost page says 2 to 4 years, with a maintenance wash every 12 to 15 months. Low-grade sealers can break down in 6 to 12 months under Florida sun. Shade and light traffic stretch the coat, and full sun shortens it.

Can brick pavers be sealed with the same sealer as concrete pavers?

Not always. Unilock says a sealer designed for concrete pavers may not suit every stone type, and a Central Florida company says brick has its own porosity and sealing needs. Ask for the product name and what it is rated for.

Why did my sealed brick pavers turn white?

Unilock traces a whitish film to trapped moisture, over-application or sealing over an incompatible older coat. A Central Florida company adds that solvent-based sealer can turn white and peel in Florida humidity. The old coat has to come off before color returns.

Do I need to wait for white haze to clear on new brick before sealing?

Yes. Unilock says sealing over efflorescence locks the deposit in, and the surface should be cleaned and dry first. That is a reason to ask when your brick was laid before you book.

Will sealing change how my Dr. Phillips brick looks?

It can. A wet look deepens and darkens the tone, and a natural finish stays close to the original. Ask for a sample on a hidden corner, and check your association's rule on sheen before choosing.

Can brick pavers near a lake in Dr. Phillips be sealed?

Yes. Ask where wash water goes, and ask how cleaners stay out of the lake. About 30 percent of Dr. Phillips by area is water, so runoff is a real question here.

Get your Dr. Phillips brick looking even again

Share what the brick looks like today, and a local contractor responds within 1 business day, and usually much sooner.

Call (689) 285-2720

Free, no obligation